Got2Fly
Active Member
Came up w/ a way to use my pneumatic squeezer on the AEX trailing edge of my -10 rudder, so thought I'd share it.
Simply, I took a yoke and found a suitable bolt to go through the hole, then used a die grinder to adjust the head of the bolt to have a flat angle matching the angle of the rudder.
An pic of the tool:
The tool in action:
So, how did the rudder come out? Well take a look at the edge:
Simply, I took a yoke and found a suitable bolt to go through the hole, then used a die grinder to adjust the head of the bolt to have a flat angle matching the angle of the rudder.
An pic of the tool:
The tool in action:
So, how did the rudder come out? Well take a look at the edge: