One of the first things that I noticed on my RV-9a was there was not a convenient place to hang my headsets after a flight. So initially, I set them on top of the dash and after a while I noticed that the steel frames on my Lightspeeds were scratching the plexiglas windscreen.
So, I built two fold out holders and attached them to a rib on the pilot and passenger side. I move it out of the way during a flight. I have used this setup for years and found it to be very neat place to hang headsets while not in use.
So, I built two fold out holders and attached them to a rib on the pilot and passenger side. I move it out of the way during a flight. I have used this setup for years and found it to be very neat place to hang headsets while not in use.
![mod1.jpg[](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2FnC5JycNS%2Fmod1.jpg%5B&hash=40aa98f477ab6d9f90ae1ba54727a115)
![mod2.jpg](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2FVSPcNZfj%2Fmod2.jpg&hash=155a57ffcf09fbb453d77ba1acf0b685)
![mod3.jpg](/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2F3yjQ0jNz%2Fmod3.jpg&hash=20d8c229e4107d9568d1da1581b87c69)
Last edited: