koupster
Well Known Member
We're assembling a previously flying RV-6. The throttle cable travel is 2 inches; full travel of the throttle arm requires 2 1/8 inches. Carb is a Precision MA-4-5 installed on an O-360; throttle cable is marked ACS Products Co., A-800BL0445-V. Possible solutions are finding a throttle cable with longer travel or drilling the throttle arm closer to the pivot.
Anybody been there and done that? Any other ideas will be welcome.
Thanks, David
Anybody been there and done that? Any other ideas will be welcome.
Thanks, David