Walt
Well Known Member
Our latest project from EXP Aircraft Services, the RV7 dream panel!
This is my brother's RV7A so it was a team effort, I let him do all the hard work (installing it in the airplane) while I did the easy stuff like basic system architecture, building custom interconnect harness, panel wiring etc..
I'd also like to give credit to the Stein Team (Christer especially) for a superb job helping getting it all to fit and then cutting the panel.
And thanks to Brandon at GloCustom Paint for the custom flat black epoxy finish.
Details:
Garmin: G3X 10" Touch, GTN750, GTR20 (remote mounted com 2), GMA240 (audio panel), GTX23ES (remote mode S xpdr), GDL39R (ADS-B in), Full A/P w/GMC307 control panel, GI260 AOA indicator with heated pitot.
(Airspeed indicator is a place holder for future back-up.)
795 was left over from old panel, probably not going to be needed much now!
This is my brother's RV7A so it was a team effort, I let him do all the hard work (installing it in the airplane) while I did the easy stuff like basic system architecture, building custom interconnect harness, panel wiring etc..
I'd also like to give credit to the Stein Team (Christer especially) for a superb job helping getting it all to fit and then cutting the panel.
And thanks to Brandon at GloCustom Paint for the custom flat black epoxy finish.
Details:
Garmin: G3X 10" Touch, GTN750, GTR20 (remote mounted com 2), GMA240 (audio panel), GTX23ES (remote mode S xpdr), GDL39R (ADS-B in), Full A/P w/GMC307 control panel, GI260 AOA indicator with heated pitot.
(Airspeed indicator is a place holder for future back-up.)
795 was left over from old panel, probably not going to be needed much now!
Last edited: