Hi Guys,
I just wanted to give Team AeroDynamics a shout out for the Wheelan replacement landing light kit and wig wag unit that they sell.
I stumbled across their website http://teamaerodynamix.com/shop by accident when watching some of their formation videos.
They are offering an excellent deal of free shipping with any purchase and the prices as real good, even for me in Sydney Australia.
The supplied kit is a drop in replacement for the Duck Works leading edge installation.
The kit is suppled with a replacement backing plate that installs into your existing landing light installation without any modifications needing to be done.
All you need to do is unscrew the Wheelan supplied bracket from the LED landing light assembly, and install the replacement bracket supplied by Team AeroDynamix.
Picture below shows the LED Light installed onto replacement bracket, there is also a picture of the wig-wag I purchased to drive the two lights.
Once this is done you remove your automotive lights and cut the wires to fit the new connectors.
Crimp the supplied spade male and female connectors onto your existing wiring.
Install the LED Landing Lights using the original two screws that held the auto lights in place.
Picture of the light screwed back into place
The entire exercise including removing and replacing the plexi landing light covers took about 30 minutes.
This was the easiest most strait forward installation I have ever experienced.
If your thinking of upgrading to LED, this is the way to go.
Picture of Plexi reinstalled
Picture of lights working
Cheers
I just wanted to give Team AeroDynamics a shout out for the Wheelan replacement landing light kit and wig wag unit that they sell.
I stumbled across their website http://teamaerodynamix.com/shop by accident when watching some of their formation videos.
They are offering an excellent deal of free shipping with any purchase and the prices as real good, even for me in Sydney Australia.
The supplied kit is a drop in replacement for the Duck Works leading edge installation.
The kit is suppled with a replacement backing plate that installs into your existing landing light installation without any modifications needing to be done.
All you need to do is unscrew the Wheelan supplied bracket from the LED landing light assembly, and install the replacement bracket supplied by Team AeroDynamix.
Picture below shows the LED Light installed onto replacement bracket, there is also a picture of the wig-wag I purchased to drive the two lights.
![6ymjib.jpg](/proxy.php?image=http%3A%2F%2Fi57.tinypic.com%2F6ymjib.jpg&hash=41f36b5595c5c69e3e17d62fcfd50f79)
Once this is done you remove your automotive lights and cut the wires to fit the new connectors.
Crimp the supplied spade male and female connectors onto your existing wiring.
Install the LED Landing Lights using the original two screws that held the auto lights in place.
Picture of the light screwed back into place
![24llenb.jpg](/proxy.php?image=http%3A%2F%2Fi60.tinypic.com%2F24llenb.jpg&hash=83dac1c42ea11cab22fcf8939afc4534)
The entire exercise including removing and replacing the plexi landing light covers took about 30 minutes.
This was the easiest most strait forward installation I have ever experienced.
If your thinking of upgrading to LED, this is the way to go.
Picture of Plexi reinstalled
![bf5rtg.jpg](/proxy.php?image=http%3A%2F%2Fi57.tinypic.com%2Fbf5rtg.jpg&hash=06e67ebceecd83e4683db97b2ebbd7ad)
Picture of lights working
![16bli55.jpg](/proxy.php?image=http%3A%2F%2Fi57.tinypic.com%2F16bli55.jpg&hash=2b46f371f8ba255aaaa044ae8341a875)
Cheers
Last edited: