CharlieWaffles
Well Known Member
Now that I am down the road and have mounted my engine quite some time ago I've come across a small tidbit of information that would have been handy to know BEFORE mounting the engine mount/engine. I did nothing special to remove the powder coat from the pads on the engine mount before they were bolted to the airframe.
So I'm beginning to wonder if my engine mount will provide sufficient grounding to the engine when a braided ground is run from the engine to the mount. Is there a resistance value I should check for with my multi-meter between the engine case and airframe ground? An acceptable range would be a good reference.
So I'm beginning to wonder if my engine mount will provide sufficient grounding to the engine when a braided ground is run from the engine to the mount. Is there a resistance value I should check for with my multi-meter between the engine case and airframe ground? An acceptable range would be a good reference.