AAflyer
Well Known Member
Looking for some sage advice re bleed through on my canopy skirt. First: what is the cause? I spent a lot of time filling and sanding this part. It's been sitting around for over a year with this filler-primer coat. Underneath is epoxy/micro fill. Pretty sure I wasn't into Bondo back then, but really can't remember.
Plan to use one-part poly for final coat. Am I looking at sealing it first? If so, with what?
Thanks.
BTW, I will NOT be building a paint booth or donning a spacesuit to paint my fiberglass parts.
Plan to use one-part poly for final coat. Am I looking at sealing it first? If so, with what?
Thanks.
BTW, I will NOT be building a paint booth or donning a spacesuit to paint my fiberglass parts.
![FullSizeRender-10_zpsodi742ss.jpg](/proxy.php?image=http%3A%2F%2Fi1381.photobucket.com%2Falbums%2Fah213%2FAAflyer%2FFullSizeRender-10_zpsodi742ss.jpg&hash=667e482afdf6d6b067e9f5766a54d083)
![FullSizeRender-8_zpsumkmn8wy.jpg](/proxy.php?image=http%3A%2F%2Fi1381.photobucket.com%2Falbums%2Fah213%2FAAflyer%2FFullSizeRender-8_zpsumkmn8wy.jpg&hash=b69bebf0158f5219ff42efc1c938ed9c)