Just wondering about the best way to start an engine with an inoperative starter solenoid..the one mounted on the firewall (starter motor is Sky-tec 149-12LS)
Seems like a wire to the starter side of the solenoid connected to a jump starter brick (with appropriate ground) would do the trick and could be set up to operate from the pilot's seat by a single person in a pinch.
Just don't want to damage any diodes or other items in the circuit. Any opinions or suggestions?
Seems like a wire to the starter side of the solenoid connected to a jump starter brick (with appropriate ground) would do the trick and could be set up to operate from the pilot's seat by a single person in a pinch.
Just don't want to damage any diodes or other items in the circuit. Any opinions or suggestions?