AltonD
Well Known Member
I need to fabricate the F-728B and F-729B angles that are 35.5" and 24 5/32" respectively.
The question is "Which angle stock to use?"
I have two 12 ft AA6-063X3/4X3/4 sections. I sure don't want to cut these if they are needed full length some place else.
Can I cut one of these 12" lengths?
The question is "Which angle stock to use?"
I have two 12 ft AA6-063X3/4X3/4 sections. I sure don't want to cut these if they are needed full length some place else.
Can I cut one of these 12" lengths?