Aero_Octaveus
Well Known Member
Well.. I've managed to put myself in a bit of a spot. While match drilling the W-726 spacers/W-731 Tie-down to the Wing Spar for the AN3 bolt, one of the holes managed to get slightly oblong in the Spar Web. At its widest point its 0.207" across. The hole in the spacer is good as well as the Tie down bar.
Do I build on?? Or go to a plan B?
http://3.bp.blogspot.com/-Aoqfouji2us/Vm4_LCPaAkI/AAAAAAAABSM/BUCtQhqeBc0/s1600/IMG_6758.JPG
http://1.bp.blogspot.com/-5yqpiV4m90M/Vm4_YbNniYI/AAAAAAAABSk/TpnoUWkZx7I/s1600/IMG_6760.JPG
Do I build on?? Or go to a plan B?
http://3.bp.blogspot.com/-Aoqfouji2us/Vm4_LCPaAkI/AAAAAAAABSM/BUCtQhqeBc0/s1600/IMG_6758.JPG
http://1.bp.blogspot.com/-5yqpiV4m90M/Vm4_YbNniYI/AAAAAAAABSk/TpnoUWkZx7I/s1600/IMG_6760.JPG
Last edited: