nippaero
Well Known Member
I have another question about my new PM8000BT harness that was made by AS. I am building the ends and connecting a couple SL40's. I have a question about how to wire the PTT back to the SL40's. I'm hoping someone can help me understand.
Setup:
BT8000BT
SL40 (Com1)
SL40 (Com2)
Pilot and CoPilot PTT switch on Mic Jack
The PTT wires (Yellow) are wired to the pilot/copilot Mic jack as shown in the PM8000BT manual. This makes sense to me. I would connect this to my PTT switch.
My question is how do I connect the PTT back from the PM8000BT to the SL40 radios? So only the active radio would transmit?
Setup:
BT8000BT
SL40 (Com1)
SL40 (Com2)
Pilot and CoPilot PTT switch on Mic Jack
The PTT wires (Yellow) are wired to the pilot/copilot Mic jack as shown in the PM8000BT manual. This makes sense to me. I would connect this to my PTT switch.
![2016-08-07-16.58.28.jpg](/proxy.php?image=http%3A%2F%2Fwww.nippaero.com%2F8180A%2Fwp-content%2Fuploads%2F2016%2F08%2F2016-08-07-16.58.28.jpg&hash=9a0ffa8e2961d0609c181c938a3fa91e)
![2016-08-07-16.58.07.jpg](/proxy.php?image=http%3A%2F%2Fwww.nippaero.com%2F8180A%2Fwp-content%2Fuploads%2F2016%2F08%2F2016-08-07-16.58.07.jpg&hash=26692fc1f13ed90bf4a084ddd3806593)
My question is how do I connect the PTT back from the PM8000BT to the SL40 radios? So only the active radio would transmit?
![PTTSL40.jpg](/proxy.php?image=http%3A%2F%2Fwww.nippaero.com%2F8180A%2Fwp-content%2Fuploads%2F2016%2F08%2FPTTSL40.jpg&hash=067cc87d639a6bec97251b1dba0248c8)