Tango Mike
Well Known Member
I didn't build the airplane, so the configuration steps taken with my 2-screen G3X setup are for the most part a mystery.
My current problem is trying to figure out how to change the max speed setting for the Trutrak GX Pilot. The builder set it too low, and it unnecessarily restricts descents when using the autopilot by raising the nose. I've been unable to find anything in the G3X installation manual that helps, but that might just be a problem in not knowing where to look.
Any advice would be appreciated so I can use the speed we love in our RVs without having to disengage the autopilot. Thanks in advance,
Tosh
My current problem is trying to figure out how to change the max speed setting for the Trutrak GX Pilot. The builder set it too low, and it unnecessarily restricts descents when using the autopilot by raising the nose. I've been unable to find anything in the G3X installation manual that helps, but that might just be a problem in not knowing where to look.
Any advice would be appreciated so I can use the speed we love in our RVs without having to disengage the autopilot. Thanks in advance,
Tosh