plumbflyer
Member
I was wondering what is the best plugs to use for the wiring on the servo motors and where to get them. It seems like it would be better to have a plug in to be able to remove the motor if it has problems.
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
servo motor connection
- Thread starter plumbflyer
- Start date
Rene Bubberman
Well Known Member
D-sub pins and sockets
We used D-sub crimped pins and sockets from SteinAir http://www.steinair.com/connectors.htm because of the small space and ditto wires. More pics on http://websites.expercraft.com/PHVII/index.php?q=log_entry&log_id=11115 These pins normally go inside a D-sub connector but can also be used individually with some heatshrink insulation. Don't forget to buy a good crimping tool.
We used D-sub crimped pins and sockets from SteinAir http://www.steinair.com/connectors.htm because of the small space and ditto wires. More pics on http://websites.expercraft.com/PHVII/index.php?q=log_entry&log_id=11115 These pins normally go inside a D-sub connector but can also be used individually with some heatshrink insulation. Don't forget to buy a good crimping tool.
