Service bulletin SB 06-2-23

[Charles in SC]

This is about safety wiring the fuel pickup tube nut. I wondered if anyone can tell me how to locate where to drill the holes in the AN818-16D nut. This is not described in the SB.
Thanks in advance!

 

[Sam Buchanan]

This is about safety wiring the fuel pickup tube nut. I wondered if anyone can tell me how to locate where to drill the holes in the AN818-16D nut. This is not described in the SB.
Thanks in advance!

All you ever wanted to know (and a lot more!) about this SB is in the following thread from the archives (the Search engine is a wonderful thing):

http://www.vansairforce.com/community/showthread.php?t=5999&highlight=06-2-23

 

[Charles in SC]

Thanks Sam, I read thru all those posts and it still did not tell me how far down the nut to drill the holes. I could have missed it because that was a long thread.

 

[Charles in SC]

Thanks for the answers. I went ahead and drilled, wired and prosealed today.