Hi all,
I'm checking for interest in my used Sensenich 72FM8S9-1 prop and aluminum spinner also provided by Sensenich. Spinner is unpainted so can be finished in any colour you like.
There are only ~75 total hours on the prop. New package for both the spinner and prop would run about ~5500 USD all-in, I'm looking for 3500 USD or best offer.
There are some cosmetic scratches on the face of the propeller and at the spinner backing plate from installation, otherwise no actual wear on the propeller due to low time and no acro.
Selling because we are producing better power on our SDS EFI O-360 engine than the pitch on the prop, and will be upgrading to a Catto prop as a result.
Good for folks who are still finishing their project or looking to replace their current prop and okay with waiting a month or so to receive this prop. Will ship with backing plate installed, not advised to remove it unless you need to.
Photos are here: https://photos.app.goo.gl/vFUX9DPNWtPVwssM9
I'm checking for interest in my used Sensenich 72FM8S9-1 prop and aluminum spinner also provided by Sensenich. Spinner is unpainted so can be finished in any colour you like.
There are only ~75 total hours on the prop. New package for both the spinner and prop would run about ~5500 USD all-in, I'm looking for 3500 USD or best offer.
There are some cosmetic scratches on the face of the propeller and at the spinner backing plate from installation, otherwise no actual wear on the propeller due to low time and no acro.
Selling because we are producing better power on our SDS EFI O-360 engine than the pitch on the prop, and will be upgrading to a Catto prop as a result.
Good for folks who are still finishing their project or looking to replace their current prop and okay with waiting a month or so to receive this prop. Will ship with backing plate installed, not advised to remove it unless you need to.
Photos are here: https://photos.app.goo.gl/vFUX9DPNWtPVwssM9
