SB 16-03-28 Inbd Aileron Hinge Bracket reinforcement interference with skin rivets
My RV-7 slow-build wing kit came with the Van's SB 16-03-28 Inbd Aileron Hinge Bracket reinforcement kit. I installed it with the aileron bracket and am now closing up the wing as I install the final skin, the lwr-outbd skin. There are two rivets to attach the lwr-outbd skin to the rear spar that can not be driven because of the close proximity with the SB 16-03-28 Doubler.
I'm wondering if others have had this same problem and what they have done?
My RV-7 slow-build wing kit came with the Van's SB 16-03-28 Inbd Aileron Hinge Bracket reinforcement kit. I installed it with the aileron bracket and am now closing up the wing as I install the final skin, the lwr-outbd skin. There are two rivets to attach the lwr-outbd skin to the rear spar that can not be driven because of the close proximity with the SB 16-03-28 Doubler.
I'm wondering if others have had this same problem and what they have done?
Attachments
Last edited: