Service Bulletin SB-00041 has been released today for the RV-12iS. It covers the inspection and assessment of a wire harness connection to the HIC module, which is located behind the instrument panel. The inspection is to be carried out before further flight, and then again at each condition inspection until the available kit has been installed, or replacement parts (available in the future) have been installed.
A kit is available that can be used to address the problem described in the SB document if the results of the documented test procedure indicate it is necessary to do so. This is a CALL TO ORDER item, for a couple of reasons:
A kit is available that can be used to address the problem described in the SB document if the results of the documented test procedure indicate it is necessary to do so. This is a CALL TO ORDER item, for a couple of reasons:
- We need the owner to perform the steps and verify with our tech support team that an issue is, in fact, addressable with the available kit.
- A limited supply of these kits is available and it is intended for installation only on flying aircraft, where the issue described in the SB document has been confirmed to exist in operation. Van's will not ship this kit to owners with aircraft where the symptoms have not been verified by our support team.
Last edited: