scnovinger
Member
Hello,
I'm building an RV7 and have started on the firewall. My planned engine is an IO-360-M1B.
While fabricating the auxiliary fuel pump doubler and laying out the hole placement, I was confused about how the platenuts were attached. Going further down the rabbit hole, I did a search on the recommended fuel pump to check dimensions and stumbled on the fact that the pump on the drawing is not recommended for fuel injected engines.
So...
1. What auxiliary fuel pump is recommended for this engine?
2. Is a doubler required for installation?
3. If so, are there other plans (Firewall Forward) which would show the installation?
I don't want to box myself in by not approaching this problem when it's easiest to address it.
Thanks for your help!
Scott
Builder #72769
N727SN (Reserved)
I'm building an RV7 and have started on the firewall. My planned engine is an IO-360-M1B.
While fabricating the auxiliary fuel pump doubler and laying out the hole placement, I was confused about how the platenuts were attached. Going further down the rabbit hole, I did a search on the recommended fuel pump to check dimensions and stumbled on the fact that the pump on the drawing is not recommended for fuel injected engines.
So...
1. What auxiliary fuel pump is recommended for this engine?
2. Is a doubler required for installation?
3. If so, are there other plans (Firewall Forward) which would show the installation?
I don't want to box myself in by not approaching this problem when it's easiest to address it.
Thanks for your help!
Scott
Builder #72769
N727SN (Reserved)