Tom Martin
Well Known Member
This shot shows the rear tail farings.
Note the reduced number of screws
Note that the aft plate has been built up to be flush with the forward part and also curved to match the curve of the forward piece. As supplied it is simply a flat piece of metal.
https://photos.smugmug.com/My-First-Gallery/i-v8wDcxc/0/4f457427/X3/IMG_6432-X3.jpg
Note the reduced number of screws
Note that the aft plate has been built up to be flush with the forward part and also curved to match the curve of the forward piece. As supplied it is simply a flat piece of metal.
https://photos.smugmug.com/My-First-Gallery/i-v8wDcxc/0/4f457427/X3/IMG_6432-X3.jpg