AntiGravity
Well Known Member
Hi Guys,
please refer to today's kitlog entry:-
http://www.mykitlog.com/users/display_log.php?user=jpreou&project=45&category=0&log=34502&row=1
Can anyone tell me if my intended bend location is ok and whether there is anything that goes near these seat belt attachments later that I need to be aware of? Since the Hooker harness needs a wider gap for the attachment, I need to put a little s-bend in these brackets. Should I bend each one a little, or put the entire bend in one side (and if so, the inboard or outboard side?).
Thanks,
please refer to today's kitlog entry:-
http://www.mykitlog.com/users/display_log.php?user=jpreou&project=45&category=0&log=34502&row=1
Can anyone tell me if my intended bend location is ok and whether there is anything that goes near these seat belt attachments later that I need to be aware of? Since the Hooker harness needs a wider gap for the attachment, I need to put a little s-bend in these brackets. Should I bend each one a little, or put the entire bend in one side (and if so, the inboard or outboard side?).
Thanks,