Hi all,
So I've purchased and rv7 QB kit locally that previous owner didn't finish. I'm looking to start at the tail and have the following questions for attaching horz stab.
1-location of the fwd spar attach holes can be seen in F-781 view c-c but don't give measurements from above only front on. Are the holes drilled thought deck then back drill them through front spar angle/shim/longerons?
2 - Rear spar attach bars are blank and rear spar of already completed horz stab has 4 X rivets yet to be drill. How will one locate holes for rear spar to attach bars
Please find attached pictures of plans that detail
https://c1.staticflickr.com/9/8361/27987470364_bab6dc4486_q.jpg
https://c1.staticflickr.com/9/8885/28497914152_da028dbd47_q.jpg
James
Australia
So I've purchased and rv7 QB kit locally that previous owner didn't finish. I'm looking to start at the tail and have the following questions for attaching horz stab.
1-location of the fwd spar attach holes can be seen in F-781 view c-c but don't give measurements from above only front on. Are the holes drilled thought deck then back drill them through front spar angle/shim/longerons?
2 - Rear spar attach bars are blank and rear spar of already completed horz stab has 4 X rivets yet to be drill. How will one locate holes for rear spar to attach bars
Please find attached pictures of plans that detail
https://c1.staticflickr.com/9/8361/27987470364_bab6dc4486_q.jpg
https://c1.staticflickr.com/9/8885/28497914152_da028dbd47_q.jpg
James
Australia
Last edited: