RV-6 Spar attach bolts

[Sam Staton]

I have had a brain f@@t, and cannot locate a hardware callout of the AN3 bolts in the spar (except for the stick bracket attach bolts). I know there are 52 of them, but what is the specific dash number? I have looked through every page of the information I have , and cannot locate them. I also presume that their torque values are standard torque for the bolt size. Thanks in advance, guys!

 

[posterman]

Spar attach bolts

Two AN3-17's are called out on drawing 15 to go through the flush spreader bar centered at 20.5" and the F604 uprights so it would make sense to use -17's through that portion of the spar that lies between the F604's. I would try -16's for the remainder unless you have a 6A and have to also go through the main gear weldments. Remember the brackets holding the floor support angles on the front side of the spar, section E-E on dwg 46 will need something longer.