RV-6 firewall

[stifler]

hi there,
can anyone advise me on the right aluminium angle to use to replace the bottom section of the firewall / floor support, and the length required. i believe it is AA6-063 x 3/4 x 3/4 but cannot be sure as it is not clear on my plans.
Thanks in advance
Steve

 

[Stevea]

The floor stiffeners (running from the firewall to the carry through bulkhead) are 3/4 x 3/4 x .063 inch angle. The bottom edge of the firewall (where the forward edge of the floor pan is attached) is a 3/4 x 3/4 x .125 inch angle.