Decided to get it done. I have yet to paint touch-up, and re-install, but would advise it will take about 8 hours total to finish, if a flying plane. These are just some of the pictures to give you an idea of the job. Not overly messy. I put a fair amount on the inside of the brackets, and when I put them on a lot pushed out. Dipped/Covered the rivets as instructed also. Together there was enough extra to smooth out the extra all over the surface to seal up everything. Don't expect a leak problem.
I was prepared, and found out the one mix was able to do both job ( seal front plate also ).
John Bender
I was prepared, and found out the one mix was able to do both job ( seal front plate also ).
![RV-12TankMod100_2082.jpg](/proxy.php?image=http%3A%2F%2Fi568.photobucket.com%2Falbums%2Fss124%2FJBender_photos%2FRV-12TankMod100_2082.jpg&hash=92a6af9d69b0c39096e7a516b29b4e0e)
![RV-12TankFix100_2101.jpg](/proxy.php?image=http%3A%2F%2Fi568.photobucket.com%2Falbums%2Fss124%2FJBender_photos%2FRV-12TankFix100_2101.jpg&hash=521f0389219fa626d56c26515010fb24)
![RV-12TankFix100_2100.jpg](/proxy.php?image=http%3A%2F%2Fi568.photobucket.com%2Falbums%2Fss124%2FJBender_photos%2FRV-12TankFix100_2100.jpg&hash=056f2e1b4e109eb0ece4a2f7a856f484)
John Bender