![Product Photo_01WebHosting.jpg](/proxy.php?image=http%3A%2F%2Fwww.phaviation.com%2FVAF-photos%2FProduct+Photo_01WebHosting.jpg&hash=73b5afa14b4b198b13c6965e8b7e4626)
We are now ready to ship our new RV-10/14 Flap Actuators.
We have four RV-10s out there with our new actuators and we are pleased with the results we have seen so far, especially in the RV-10 in which we installed our actuator here locally.
Here is a thread with one builder's experience:
http://www.vansairforce.com/community/showthread.php?t=159862&highlight=flap+actuator
Again, these actuators are an upgrade over the factory flap motors in that they stop when they get to the end of their stroke (standard 5"), they have internal position sensors, and the safety-wire service bulletin is not required. Extension/retraction time is about 12 seconds, same as the stock units.
Please compare the price of our actuator with the stock flap motor, which just might be the best feature of our new product!