jhearnsberger
Active Member
What kind of rivets did you guys use when attaching the leading edge of the wing to the main spar?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
rivets to use attaching leading wing edge to spar
- Thread starter jhearnsberger
- Start date
Bill.Peyton
Well Known Member
Provide additional information such as the manual reference.
flion
Well Known Member
Page 17-4 has the callouts. I used LP4-3s everywhere except the end ribs, which got the solid rivets. I didn't try to put solid rivets on the next to last outboard rib; the gun would be working too close to the main rib for my comfort. The skin rivets are AN426AD 3-4s. Perhaps I don't understand the question...
Leading edge rib to spar rivets
I to followed the pland I used solid an where i could reach IE end ribs and lp=4=3 on the rest.
I do agree the call out in the pkans had to be read closely buy they all worked out great.
Just completed that step a few weeks ago.
Now on to fuel tanks.
I to followed the pland I used solid an where i could reach IE end ribs and lp=4=3 on the rest.
I do agree the call out in the pkans had to be read closely buy they all worked out great.
Just completed that step a few weeks ago.
Now on to fuel tanks.
jhearnsberger
Active Member
That's what I wanted to know. I was just curious as to how many people used LP4's. I have not used any cherry max rivets in my build yet, but if anyone was using them to attach the leading edge I was going to look into buying some of those instead of the LP4's.
