Junglepilot
Well Known Member
I am just about done with the tower install and to the point where instructions say something to the effect "Install the rest of the rivets", those being the sides (23 or so each side).
Before I go banging up steel and aluminum, as some of those rivets are in tiny nooks & crannys, and advice would be appreciated.
Did you use special bucking bars, make special bucking bars, do some with CR's etc. Just curious before I tackle this to have some alternative ideas.
Thanks,
Sandy
Before I go banging up steel and aluminum, as some of those rivets are in tiny nooks & crannys, and advice would be appreciated.
Did you use special bucking bars, make special bucking bars, do some with CR's etc. Just curious before I tackle this to have some alternative ideas.
Thanks,
Sandy