Bill Britton
Well Known Member
I prosealed the trailing edges on my elevators today (RV-10) and am waiting on the "glue" to dry. Meanwhile, I'm fretting over riveting the trailing edges. My rudder was already done when I bought the kit so this is the first trailing edge riveting I'll do. Any hints/tips??? I think I've read where somebody alternated the rivets (side to side) so all the shop heads were not on the same side. On the elevators I think I'd rather the factory heads were on top but would it make a difference how the final product will look if they are alternated???
Thanks in advance,
Bill Britton
RV-10 elevators/ deburring tailcone parts
Thanks in advance,
Bill Britton
RV-10 elevators/ deburring tailcone parts