fstringham7a
Well Known Member
RE
ynon/EZ/Garmin Panel
Thought I would share with the group a pix of my panel in it's lates stage of development. Empty trays for Dynon EFIS/EMS, Garmin centric nav/com/EZ Pilot and Altitude hold. Back end will be wired up with Fast Stack Hub and wiring harness. I am also using Aeroelectric Z13/8 wiring architecture. Making the big cut and sizing just right was a one week process. Jig saw rough cut then file-check.....file-check....file-check...you get the idea. I spent today determining switch locations/drilling/and mounting switches.
![](/proxy.php?image=http%3A%2F%2Fimg180.imageshack.us%2Fimg180%2F254%2Frv7a06062007bk7.jpg&hash=d1300cf6b113bb3e4b3c398424be6523)
[ Frank @ sgu RV7A "NDY"
Thought I would share with the group a pix of my panel in it's lates stage of development. Empty trays for Dynon EFIS/EMS, Garmin centric nav/com/EZ Pilot and Altitude hold. Back end will be wired up with Fast Stack Hub and wiring harness. I am also using Aeroelectric Z13/8 wiring architecture. Making the big cut and sizing just right was a one week process. Jig saw rough cut then file-check.....file-check....file-check...you get the idea. I spent today determining switch locations/drilling/and mounting switches.
![](/proxy.php?image=http%3A%2F%2Fimg180.imageshack.us%2Fimg180%2F254%2Frv7a06062007bk7.jpg&hash=d1300cf6b113bb3e4b3c398424be6523)
[ Frank @ sgu RV7A "NDY"
Last edited: