RE:Baffling

[fstringham7a]

RE:Baffling

I am about done with the baffling on my ECi IOX-360 engine. I have decided to go the extra MILE........................and build a plenum instead of the usual system. Everything is fabricated except deciding on the Al gage for the hood of the plenum. I have .032 stock available and think that it is up to the task. For those that have done the plenum style or for those in know am I ok with
.032 or............................

Frank @ sgu RV7A 95% done 95% to go

 

[carguy614]

plenum

Used .040 on my plenum top. Perfect I think. Watch the posts for pictures of my finished baffle/plenum job very soon.

Regards, Chris

 

[fstringham7a]

RE:Thanks for advice

Used .040 on my plenum top. Perfect I think. Watch the posts for pictures of my finished baffle/plenum job very soon.

Regards, Chris

I went with the .040 Al / made templetes / cut to shape / ......good friend with a bending brake.........and I now have a hood for my plenum.

Frank @ sgu RV7A baffling all but done........