Ray Allen 207 Grip

[shiney]

Has anyone got a pic for the wiring of the two SPDT witches at the top of the 207. I have used this diagram for wiring (figure 2) http://www.rayallencompany.com/RACmedia/instructionsT2andT3.pdf
but despite bench testing and changing the combinations nothing is happening! All the other 4 switches are working fine.

If it's possible that someone has taken a pic of their wiring it would really help me.

Thanks

Shiney.

 

[rglick]

Shiney,

I have the 307 Grips and used the other drawing for reference on wiring the top of the grips. You will use either Style 1 (Singe grip system) or Style 2 (2 grip system). A 2 grip system will need the REL-X Relay Deck between the Servo and the two grips. I'm sure you have also checked the switch with an ohm meter for operation??

This is the drawing for the 207
http://www.rayallencompany.com/RACmedia/instructionsG2grip.pdf

If you still need a pic of a grip inside, I can dig up my 307 pic which should be similar.