Ran Out of CS4-4

[JohnF]

I am riveting the roll bar and discovered I am out of CS4-4 flush rivets. I inventoried the fuselage kit and everything was there...I just ordered more from Van's but I thought it untypical that there was not as many in the kit as was required. Hmmmm...?

 

[JBPILOT]

Had enough

I did not order any more, so not sure what may have happened. I do recall getting into the wrong kit bags and using more from the wrong kit bag. Don't ask ! Just a thought.

John Bender

 

[Tony_T]

Found a few left over...

There are barely enough in the Fuselage Kit. I had to drill several out, and ran short. But, I found a small amount of CS4-4 left over from both the empennage and wing kit, so did not have to order any.

Tony

 

[RGaines]

Rivets

I also ran short on the roll bar by 2 rivets. Van's said there would be enough in finish kit to make up for it. There were enough.

Rich

 

[Geico266]

I also ran short on the roll bar by 2 rivets. Van's said there would be enough in finish kit to make up for it. There were enough.

Rich

Yep, I ran out also, and found plenty in the next kit.

 

[Fl Mac]

I am about 6 short in the wing kit.