Quick build wing instructions lacking

[caapt]

The QB wing instructions make no reference to how to prepare the outboard J strips for riveting. No reference to cutting to proper length, how to locate and drill holes. Tech support was no help other than the page to reference the length to cut to.
Y’all be careful out there

 

[PhatRV]

I can see why projects stalled out and never got finished

 

[Jetmart]

They do say to confirm all QB steps were completed by going through all construction steps in the plans. I found the wing plans to be as good as any of the other plans on the 14. My understanding is the 14 plans are miles ahead of all other previous models.

 

[mturnerb]

I ran into the same problem.

Van's support referred me to this document:

https://www.dropbox.com/scl/fi/fabk...ns-1.pdf?rlkey=mdph4w2q5oc7a35ldbl6tjint&dl=0

You need to look at RV-14 Section 16 to find the correct LENGTH for RV-14 wings but the instructions in the link (for RV-10 wing) tell you the procedure (look at the ones noted to be for quick build).