alpinelakespilot2000
Well Known Member
I'm about ready to close up my rudder and elevators on a -9 and inadvertantly primed (with Variprime) the inside rudder skins as well as the wedge that will go between them. Given that I'm going to use Proseal for those trailing edges, will I have to remove the Variprime before I can successfully use Proseal to bond the edges and wedge together? I've found that lacquer thinner will take off the Variprime relatively easily, but would prefer to avoid doing that if leaving it on will not pose complications for the Proseal.
Thanks,
Steve
Thanks,
Steve