Karetaker
Well Known Member
Howdy everyone. I have a blade type heated pitot with 2 new cartridge heaters installed. Both are 14v heaters; one is 100W and the other is 70W. Each have two conductors that have no ID marks on them, about 12" long. AWG seems to be about 18 to 20. ( Thin in my opinion.)
Do I connect each + and each - together and run 2 wires to cockpit or do I run all 4 individually? Opinion on local ground? AWG for run back to cockpit? I planned on 12 or 14 AWG.
Thanks for the insight.
Do I connect each + and each - together and run 2 wires to cockpit or do I run all 4 individually? Opinion on local ground? AWG for run back to cockpit? I planned on 12 or 14 AWG.
Thanks for the insight.