Charles in SC
Well Known Member
Hello all. I recently took my cowling, wheel pants etc. To a painter friend of mine and had him spray them with some epoxy primer. It was a brand he recommended and he has been in the business over 30 years. After he sprayed them there were pin holes everywhere. I know very little about painting other than house paint of which I have used hundreds of gallons. Is there a fix for this or do I need to sand it all off and find another painter.
He said it was because my fiberglass was so rough but he did not say anything about this before painting it. This is just mainly a protective coat until I can get a real paint job.
He said it was because my fiberglass was so rough but he did not say anything about this before painting it. This is just mainly a protective coat until I can get a real paint job.