Here are some pictures of our Sierra seats and side panels that were just completed for a customer. I wanted to put these out there because I've found that many customers don't realize that we offer products at several price points.
When we started in 2003, we were the lowest price seat option available. As time went on we made improvements to our products. Quality and innovation became our focus, and cost went up. We split our products into two lines (Sportsman and Aviator) to help address this.
A couple of years ago we experimented with some ideas to streamline seat construction, and came up with our CA-1 seat. Our current Sierra seat is an improvement and extension of those ideas, and is a very high quality product at a reasonable price.
The Sierra side panels fill a hole that we've had in our product line for a while. That is a basic but high quality side panel option for RV-7/9 aircraft. Here are some of the bullet points.
Sierra Seats
Sierra Side panels
Don't be shy. Please feel free to share your comments, thoughts, ideas, or questions on the direction of our interior products.
PS - We are working on products for you RV-14 guys and girls. Hope to have more for you soon...
Sierra seat with Ultraleather trim and Ultrasuede inserts.
Sierra seat bare foam (note smooth curved shape)
Sierra side panel main pieces (smaller pieces are not shown here)
Closeup of air vent panel
Closeup of pleated panel above armrest (note that this picture shows a tipup version with latch cutout. Also top and bottom edges are not visible when installed)
When we started in 2003, we were the lowest price seat option available. As time went on we made improvements to our products. Quality and innovation became our focus, and cost went up. We split our products into two lines (Sportsman and Aviator) to help address this.
A couple of years ago we experimented with some ideas to streamline seat construction, and came up with our CA-1 seat. Our current Sierra seat is an improvement and extension of those ideas, and is a very high quality product at a reasonable price.
The Sierra side panels fill a hole that we've had in our product line for a while. That is a basic but high quality side panel option for RV-7/9 aircraft. Here are some of the bullet points.
Sierra Seats
- 1" memory foam standard
- Smooth curves in foam shapes
- 90% of foam cuts are done with CNC saw
- Light weight (3.7 lb. per seat in cloth)
- $786 - $1287 (a pair)
Sierra Side panels
- Ready to install. No trimming required by customer
- Cover about 90% of cabin area sides
- Optional pockets
- Light weight (5.2 lb. tailwheel 6.7 lb. nosewheel in cloth)
- $639 - $996
Don't be shy. Please feel free to share your comments, thoughts, ideas, or questions on the direction of our interior products.
PS - We are working on products for you RV-14 guys and girls. Hope to have more for you soon...
Sierra seat with Ultraleather trim and Ultrasuede inserts.
Sierra seat bare foam (note smooth curved shape)
Sierra side panel main pieces (smaller pieces are not shown here)
Closeup of air vent panel
Closeup of pleated panel above armrest (note that this picture shows a tipup version with latch cutout. Also top and bottom edges are not visible when installed)
Last edited: