rcsilvmac
Well Known Member
I have a Cleveland Parking Brake on my RV-6A. It is leaking at the top cylinder so I purchased some o-rings in an attempt to rebuild it. My question is how is it attached to the bulkhead?
I looked through the plans and couldn't see how the brake mechanism is attached. My plane has carpet installed on the bulkhead and I would prefer not to tear it all out to figure out how the brake system is mounted if I don't have to. I tried searching through the forums here and couldn't find any discussion related to removal of this system.
Anyone who has done this before me, guidance would be appreciated.
Thanks - Chris
I looked through the plans and couldn't see how the brake mechanism is attached. My plane has carpet installed on the bulkhead and I would prefer not to tear it all out to figure out how the brake system is mounted if I don't have to. I tried searching through the forums here and couldn't find any discussion related to removal of this system.
Anyone who has done this before me, guidance would be appreciated.
Thanks - Chris