While waiting for the arrival of my Garmin servos, I thought I would amuse myself and take a few photos of some of the things I'm doing that might be helpful to others. Here is the pitch servo mounting setup from the Garmin mount kit:
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F002_zpsfdfbd2ad.jpg&hash=86b1899724eb6a7a86365716a73a39fe)
Here is where I mounted my GPS antenna for the new GDL-39R ADS-B receiver, which I'm mounting in the back tailcone.
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F039_zps6f60c1cc.jpg&hash=7e5a6eb078725971c1be26ba6e489746)
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F003_zps919e7f94.jpg&hash=ec32fce9cd70b3e22d99b4512f2556f2)
Here is where I mounted my GTX-23ES, at the bottom of the radio stack:
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F073_zpsc8340903.jpg&hash=93bb691662192e96318a22e1a89be5b5)
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F076_zps73f1b336.jpg&hash=a93346b5d166a4a11ac8975d53d034f5)
And finally here is the Lexan mockup panel that I am using to locate the cutouts for the radios, etc.:
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F107_zps83c0d304.jpg&hash=1455d6dea275ccda6f3c92c6037698d6)
The Lexan mockup is working out very well so far; once I have everything cut out and drilled, including the location of the mounting screws, I'll transfer it to the .063 aluminum sheet. I used a 1/16" Lexan sheet that I got from Spruce for this.
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F002_zpsfdfbd2ad.jpg&hash=86b1899724eb6a7a86365716a73a39fe)
Here is where I mounted my GPS antenna for the new GDL-39R ADS-B receiver, which I'm mounting in the back tailcone.
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F039_zps6f60c1cc.jpg&hash=7e5a6eb078725971c1be26ba6e489746)
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F003_zps919e7f94.jpg&hash=ec32fce9cd70b3e22d99b4512f2556f2)
Here is where I mounted my GTX-23ES, at the bottom of the radio stack:
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F073_zpsc8340903.jpg&hash=93bb691662192e96318a22e1a89be5b5)
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F076_zps73f1b336.jpg&hash=a93346b5d166a4a11ac8975d53d034f5)
And finally here is the Lexan mockup panel that I am using to locate the cutouts for the radios, etc.:
![](/proxy.php?image=http%3A%2F%2Fi445.photobucket.com%2Falbums%2Fqq178%2Fpat_hatch%2FAirplane%2520Stuff%2F107_zps83c0d304.jpg&hash=1455d6dea275ccda6f3c92c6037698d6)
The Lexan mockup is working out very well so far; once I have everything cut out and drilled, including the location of the mounting screws, I'll transfer it to the .063 aluminum sheet. I used a 1/16" Lexan sheet that I got from Spruce for this.