WingedFrog
Well Known Member
Can anyone tell me how he did the chanfer for the shoulder strap? File? Scotchbrite wheel? Sanding disk? Is the correct size critical (1/16 X 1/32)?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Page 25-02 How to Chanfer?
- Thread starter WingedFrog
- Start date
25-02 step 3
The purpose of removing material from the edge the shoulder strap lug is to prevent interference with the inside corner of the tail skin flange. It is not critical, but if you are going to error, it is better to take slightly more off than to leave too much on. A vixen file works great for removing material quickly.
Joe Gores
The purpose of removing material from the edge the shoulder strap lug is to prevent interference with the inside corner of the tail skin flange. It is not critical, but if you are going to error, it is better to take slightly more off than to leave too much on. A vixen file works great for removing material quickly.
Joe Gores
WingedFrog
Well Known Member
Thanks guys!
