joedallas
Well Known Member
Step 10: Cleco the F-1203C Stub Spar Receptacle and the F-120D-L Stub Spar Receptacle Support
to the F1203A Bulkhead as shown in Figure 5. Rivet the parts together using the two rivets called-out. Final-Drill #30 any holes too tight to accept to accept a rivet.
add (These rivets will be added in latter steps )
to the F1203A Bulkhead as shown in Figure 5. Rivet the parts together using the two rivets called-out. Final-Drill #30 any holes too tight to accept to accept a rivet.
add (These rivets will be added in latter steps )
Last edited: