George Costigan
I'm New Here
I have developed a leak at the sump gasket at the rear right corner where the sump gasket and vertical gaskets meet. After cleaning I used foot powder to find the source of the leak. After running the engine for 5 minutes it was very noticeable. Left alone the oil will run around the perimeter of the sump seam and gasket and get blown everywhere. The engine was rebuilt and has 65 hours on it.
What is the best approach to fix. Any of the following or a combination work well? Self Wicking Locktite 290, Permatex Spray Sealant Leak Repair, Permatex The Right Stuff, Proseal.
Has anyone had success fixing a like like this? Hopefully this can be fixed or at least slowed down. I can live with some small leak but the way it is now is unacceptable.
Thanks in advance for any help or suggestions.
What is the best approach to fix. Any of the following or a combination work well? Self Wicking Locktite 290, Permatex Spray Sealant Leak Repair, Permatex The Right Stuff, Proseal.
Has anyone had success fixing a like like this? Hopefully this can be fixed or at least slowed down. I can live with some small leak but the way it is now is unacceptable.
Thanks in advance for any help or suggestions.