Andy Hill
Well Known Member
Tried a search but no direct answer immediately apparent.
I have the stock Vans Oil cooler, and it's done about ~500hrs and is ~6years old, but not been used for ~1 year. Have the opportunity to pressure test before back into service, so does anybody have any advice on a suitable pressure to test it to?
I see Niagra "pressure test" to 400psi and "leak test" to 100psi - apart from the nomenclature, not exactly sure of the difference? I'd use that as a start unless somebody has a good alternative![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Thanks in anticipation...
I have the stock Vans Oil cooler, and it's done about ~500hrs and is ~6years old, but not been used for ~1 year. Have the opportunity to pressure test before back into service, so does anybody have any advice on a suitable pressure to test it to?
I see Niagra "pressure test" to 400psi and "leak test" to 100psi - apart from the nomenclature, not exactly sure of the difference? I'd use that as a start unless somebody has a good alternative
Thanks in anticipation...