rightrudder
Well Known Member
Please confirm is the following is correct on my IO-320 D1A. I think I have it right, but it never hurts to confirm!!
Top photo: circular boss with hex plug, to the left of the red caps, is for top oil cooler line.
Top red cap is breather, lower is mechanical tach drive.
Bottom photo: circular boss with hex plug beneath oil filter is for bottom oil cooler line.
More questions:
1) Do the plan suggestions for fittings here (45 degrees top, straight out for bottom) work well? Oil cooler will be in standard spot, right rear corner.
2) Does anyone sell a cap for the tach drive, or is the red plastic cap sufficient?
Thanks!
Top photo: circular boss with hex plug, to the left of the red caps, is for top oil cooler line.
Top red cap is breather, lower is mechanical tach drive.
Bottom photo: circular boss with hex plug beneath oil filter is for bottom oil cooler line.
More questions:
1) Do the plan suggestions for fittings here (45 degrees top, straight out for bottom) work well? Oil cooler will be in standard spot, right rear corner.
2) Does anyone sell a cap for the tach drive, or is the red plastic cap sufficient?
Thanks!