cardinalflier
Well Known Member
The previous owner of my RV6 installed a Dynon OAT Probe on the rear tailcone under the stab forhis D10a install. The adahrs unit is in front of the stab under the fairing. I upgraded to the Skyview (which I love), using the same location for the adahrs unit and the OAT probe. On the ground, my oat reading is accurate, but in the air my reading is 10-20 degrees high because of exhaust. I'm looking for suggestions on where to move the probe to, maybe under the rudder fairing? I would like to keep the probe at the rear for ease of new installation, less wiring to move or splice. Thanks, Bruce