I am at the point where I need to think about ordering my 9A finishing kit. Unfortunately, I do not yet have an engine, and plan on buying used in the next year or so when I spot a good deal. Plan is for a low-compression O-320, but 160HP not out of the question.
I need to specify engine mount type and induction type (vert or horiz) to order the finishing kit, but obviously I don't know yet, so my question is if there is one setup that is most common among the o-320's I am likely to find, so that I can plan on that, and if need be make changes later. I believe that most are Dynafocal type I, but am unsure as to induction style.
Any suggestions from the experts? Thanks!
Chris
I need to specify engine mount type and induction type (vert or horiz) to order the finishing kit, but obviously I don't know yet, so my question is if there is one setup that is most common among the o-320's I am likely to find, so that I can plan on that, and if need be make changes later. I believe that most are Dynafocal type I, but am unsure as to induction style.
Any suggestions from the experts? Thanks!
Chris
Last edited: