rjcthree
Well Known Member
Those (poor sods) who've done an H2 install, if you used the standard fuel pump, did you route the output of the engine driven fuel pump back over the cylinders down the backside of the engine down to the carb, or did you drop straight down and work around the crossing exhaust pipes?
My plan was to go back over the top, but it's a solid 4' of a run, and it's getting crowded back there. Going straight down, through the baffle, past the crossover exh pipes, while having to go past the exhaust, is only about an 18" run. I need to decide, it's the only plumbing left.
Rick 90432
My plan was to go back over the top, but it's a solid 4' of a run, and it's getting crowded back there. Going straight down, through the baffle, past the crossover exh pipes, while having to go past the exhaust, is only about an 18" run. I need to decide, it's the only plumbing left.
Rick 90432