I'm struggling with what I think is not very good documentation of what needs to be mounted where and how. I've been struggling with the prop governor, the control arm and the governor bracket. The photo (I hope) shows where I've got to. This orientation seems to be the only one where the various slots and holes between th governor and the engine make sense, and the only position that the bracket then fits into. However, the whole thing then looks rotated from what I would have called 9.00 round to 11.00. As I understand the Vans instructions I need still to rotate the control arm all the way round to what is going to be abut 2.00. Have I completely misunderstood? It bears no resemblance to the Vans drawing or pictures I have previously seen.
The engine was assembled by JadeAir here in England so I'm presuming that he mount for the governor is mounted correctly to the block.
As ever, waiting hopefully for helpful comments.
Thanks
Chris
http://img237.imageshack.us/img237/4898/marchrvbuildfng027pf6.jpg
The engine was assembled by JadeAir here in England so I'm presuming that he mount for the governor is mounted correctly to the block.
As ever, waiting hopefully for helpful comments.
Thanks
Chris
http://img237.imageshack.us/img237/4898/marchrvbuildfng027pf6.jpg