andrewbutler
Member
Hello,
I was cleaning my prop today. I noticed lateral cracks on the surface emulsion, present on all three blades, though one has more than the the others. I took some photos. They appear like streak marks, but they are not. They definitely have a small but noticeable relief above the surface.
My aircraft, EI-EEO is an RV 7 with about 230 on the Hobbs. Engine is a Lycoming IO-360 180Hp 8.5 compression.
Prop is an MTV-12-B-183-59b
Advice?
Best regards,
Andrew Butler.
Photos are here: https://plus.google.com/photos/112193437258143479832/albums/6056025235208864289?authkey=CODSkofu-JjaCw
I was cleaning my prop today. I noticed lateral cracks on the surface emulsion, present on all three blades, though one has more than the the others. I took some photos. They appear like streak marks, but they are not. They definitely have a small but noticeable relief above the surface.
My aircraft, EI-EEO is an RV 7 with about 230 on the Hobbs. Engine is a Lycoming IO-360 180Hp 8.5 compression.
Prop is an MTV-12-B-183-59b
Advice?
Best regards,
Andrew Butler.
Photos are here: https://plus.google.com/photos/112193437258143479832/albums/6056025235208864289?authkey=CODSkofu-JjaCw