Rick6a
Well Known Member
Governor Bracket Mounting Question
Trial fitting the MT governor to the recently delivered IO-360 engine, I note the stud pattern differs from the VA-183 INSTL drawing in that the stud pattern on the engine is generally diamond shaped and the drawing shows it to be generally square. Consequently, the VA-183 govenor cable bracket can only be oriented as shown in the photos. This is at variance with the bracket orientation as shown on the drawing. Is this correct or am I overlooking something?
Trial fitting the MT governor to the recently delivered IO-360 engine, I note the stud pattern differs from the VA-183 INSTL drawing in that the stud pattern on the engine is generally diamond shaped and the drawing shows it to be generally square. Consequently, the VA-183 govenor cable bracket can only be oriented as shown in the photos. This is at variance with the bracket orientation as shown on the drawing. Is this correct or am I overlooking something?
![engine031editvs8.jpg](/proxy.php?image=http%3A%2F%2Fimg127.imageshack.us%2Fimg127%2F8910%2Fengine031editvs8.jpg&hash=c7272147538404b6bba66b8062c809b8)
![engine029editul2.jpg](/proxy.php?image=http%3A%2F%2Fimg127.imageshack.us%2Fimg127%2F6548%2Fengine029editul2.jpg&hash=6f0ec50738633287d355dc3601e6fb78)
Last edited: